This is a legacy product no longer offered by Intepro Systems. We recommend checking out the ADG-P or ADG-L which are a few of our current Programmable DC Power Supplies.Should you need technical assistance, we will continue to support our legacy products through our support section.

The Intepro PSI 9000 Series are Auto-Ranging Programmable DC Power Supplies that feature an efficient design coupled with increased performance for applications that demand fast response times, advanced power simulation modes and precision control. The PSI 9000 Series includes an Integrated Function Generator that allows creation of arbitrary disturbances for complex testing. They also include a galvanically isolated analog interface for voltage, current and power programming and monitoring. An industry-leading selection of digital remote plug-and-play modules is at your disposal.


Key Features of the PSI 9000 INTELLIGENT PROGRAMMABLE DC SUPPLY products:

  • Auto-Ranging

    Auto-Ranging Output Stage
  • Generator

    Integrated Function Generator
  • Simulation

    Photovoltaic Solar Array & Fuel Cell Simulation
  • Impedance

    Programmable Output Impedance
  • Efficiency

    Up to 95%
  • Output Power

    Between 1kW &1MW

User and process profiles can be edited, saved and archived so that the reproducibility of a test or other application is improved. In addition, a single 3U chassis houses up to 15kW of DC power and can be paralleled up to 1MW. Each chassis features a controller which allows the flexibility of separating into individual sources or paralleling for high power applications.

All PSI 9000 models feature a flexible Auto-Ranging output stage which provides higher output current at reduced voltages so the source maintains maximum output power across a wide range of voltage operation. Traditional DC sources offer a square operation curve meaning the source maintains maximum rated current at less than full scale voltage. A traditional 5kW DC source with a voltage range of 500V provides 10A at full scale. At 200V, the source still only offers 10A so 2kW is actually delivered to the unit under test.

Auto-Ranging addresses this issue by automatically increasing the output current at reduced voltages. Take the PSI 9500-30 which is 5kW as an example. At 500V the source offers 10A. At 200V the source provides 25A which means the source maintains a 5kW output rating.

Auto-Ranging is especially useful when testing products that require varied input voltages while maintaining regulated output power. This feature often results in a single chassis solution versus buying multiple sources to address low and high voltage / current requirements. It can also help reduce inventory as many voltages can be covered by a single model number.

The remote sensing function is achieved via dedicated input which is directly connected to the load equipment, in order to compensate voltage drops along the load cables up to a certain degree. The power supply detects automatically whether the sensing input is connected and will stabilize the voltage directly at the load.

Integrated Function Generator

The FPGA based control circuit provides additional features such as a function generator using a table-based regulation circuit for simulation of non-linear internal resistances.

Rectangle Wave


Triangle Wave


Trapezoid Wave


Sine Wave


Complex Sequence Generator

By linking together a number of differently configured sequences, complex progressions can be created. Smart configuration of the arbitrary generator can be used to match triangular, sine, rectangular or trapezoidal wave functions and thus, e.g. a sequence of rectangular waves with differing amplitudes or duty cycles can be produced.

For the implementation of the LabView IDE Intepro offers ready-to-use components (VIs) to be used with the Ethernet interface. Other IDEs and interfaces may be supported upon request.

Complex Sequence Generator


Solar Array Simulation

The PSI is an ideal solution for simulating static or dynamic irradiance levels of solar array. The high accuracy irradiance curve is based on 16,400 data points and adjustable in 1% increments. Isc, Uoc, MPP and Impp are user programmable.

solar pv array


Fuel Cell Simulation

An embedded Fuel Cell table function is used to simulate the characteristics of voltage and current of a fuel cell. Simply define slope points and the data is automatically calculated then transferred to the function generator and output from the DC source.



front panel


User Interfaces


User Control

The large LCD touch panel offers a modern and intuitive user interface for controlling the four operating modes: Constant Voltage (CV), Constant Current (CC), Constant Power (CP) and Constant Resistance (CR). Response times for the control via analog or digital interfaces by the DSP controlled hardware are among the fastest in the industry. In parallel operation of multiple devices, a master-slave bus is used to connect the chassis to create high power system where the actual values are totaled and the set values distributed.

An Internal resistance control provides a means to virtually simulate an internal resistance (Programmable Impedance) which is in series to the voltage source and thus also in series to the load. According to Ohm’s Law, this causes a voltage drop, which will result in a difference between adjusted output voltage and the actual output voltage. This is beneficial for simulation of various lengths of different types of cables to determine loading effects.

resistance image


About us

Intepro Systems is a Power Systems manufacture with over 35 years experience in the field.

thumbnail_Screen_Shot_2022-07-12_at_91852_AM PSI 9000 PROGRAMMABLE DC SUPPLY - Intepro Systems


Overview Brochure 1
Get to know Intepro Systems!
Product Downloads 25
A comprehensive list of our online literature.


  Email us at: Sales@inteproate.com

  (714) 953-2686

  (714) 673-6567

14662-E Franklin Avenue
Tustin, CA 92780

usa PSI 9000 PROGRAMMABLE DC SUPPLY - Intepro Systems

Intepro Systems America, LP

14662-E Franklin Avenue
Tustin, CA 92780
Call: 714-953-2686

uk PSI 9000 PROGRAMMABLE DC SUPPLY - Intepro Systems

Intepro UK Ltd.

9 Lakeside Business Park
Swan Lane, Sandhurst Berkshire
GU47 9DN / UK
Call: 44 012 5287 5600

ireland PSI 9000 PROGRAMMABLE DC SUPPLY - Intepro Systems

Intepro Systems Ireland Limited

Lonsdale Road
National Technology Park Limerick / Ireland
Call: 353 61 33 22 33

china PSI 9000 PROGRAMMABLE DC SUPPLY - Intepro Systems

Intepro Power Electronics (Shenzhen) Co., Ltd

NO. 316, Block 4,
Fourth Industrial Area
Nanyou, Nashan District
Shenzhen, China 518052
Tel: 0086 755 86500020