The PS 9000 series offers up to 3kW in a 1U chassis and up to 15kW in a 3U chassis. The PS 9000 is an Auto-Ranging DC Programmable Power Supply with increased performance for applications that demand fast response times and precise control. The PS 9000 Series products include a galvanically isolated analog interface for voltage, current and power programming & monitoring. The PS 9000 also features an industry-leading selection of manual, digital and analog interface controls.
Key Features of the PS 9000 AUTO-RANGING DC PROGRAMMABLE POWER SUPPLY products:
-
High Efficiency
Up to 95.5% -
Remote Sensing
With Automatic Detection -
Cooling
Temperature Controlled Fan Speeds -
Auto-Ranging
Higher current at reduced voltage or higher voltage at reduced current, subject to Power Rating -
Control Panel
With Pushbuttons & Blue LCD for Actual Values, Set Values, Status & Alarms -
Inputs
USB & Ethernet Port Integrated or alternatively installed IEEE/GPIB Port -
Command Language
SCPI Command Language Supported

Videos
Intepro’s Auto-Ranging Advantage
User Manuals & Datasheets
PS 9000 1U Datasheets
Popular |
|
PS 9000 1U User Manual
Popular |
|
PS 9000 3U Datasheets
Popular |
|
PS 9000 3U User Manual
Popular |
Application and Tech Notes
Auto-Ranging Tech Note
Popular |
— Programming Guide & Drivers —
A single 1U chassis houses up to 3kW of DC power. The clearly arranged control panel features two rotary knobs, six pushbuttons and two LEDs. Together with an illuminated blue display for all values and status, simplifying use of the device.
The PS 9000 3U model allows the user to achieve even higher output power, up to 15kW. Cabinets with up to 150 kW and up to 42U size can be configured to suit various requirements.
All PS 9000 models feature a flexible Auto-Ranging output stage which provides higher output current at reduced voltages so the source maintains maximum output power across a wide range of voltage operation. Traditional DC sources offer a square operation curve meaning the source maintains maximum rated current at less than full scale voltage. A traditional 5kW DC source with a voltage range of 500V provides 10A at full scale. At 200V, the source still only offers 10A so 2kW is actually delivered to the unit under test.
Auto-Ranging addresses this issue by automatically increasing the output current at reduced voltages. Take the PSI 9500-30 which is 5kW as an example. At 500V the source offers 10A. At 200V the source provides 25A which means the source maintains a 5kW output rating.
Auto-Ranging is especially useful when testing products that require varied input voltages while maintaining regulated output power. This feature often results in a single chassis solution versus buying multiple sources to address low and high voltage / current requirements. It can also help reduce inventory as many voltages can be covered by a single model number.
The remote sensing function is achieved via dedicated input which is directly connected to the load equipment, in order to compensate voltage drops along the load cables up to a certain degree. The power supply detects automatically whether the sensing input is connected and will stabilize the voltage directly at the load.
User Interfaces
The large LCD panel offers a modern and intuitive user interface for controlling the four operating modes: Constant Voltage (CV), Constant Current (CC) and Constant Power (CP). Response times for the control via analog or digital interfaces by the FPGA controlled hardware are among the fastest in the industry. In parallel operation of multiple devices, a master-slave bus is used to connect the chassis to a create high power system.