1.714.953.2686
44.1252.875600
353.61.332233
DC Electronic Loads
Intepro Systems are proud to offer a wide selection of DC Loads. Intepro Systems Series of DC Electronic Loads are designed for ultimate flexibility and configuration in providing the ideal load solution for testing AC/DC power supplies, DC/DC converters, chargers, batteries, adapters, and power electronic components. These loads can be used for research, development, production and incoming inspection applications. All loads are controlled via Ethernet, USB or GPIB.
Intepro loads operate at the high speeds necessary to meet the demanding transient and dynamic response characteristics required for today's modern PSU. All ML Loads have independent control of the positive and negative slew rates. Two ranges provide full scale transitions from 10uSecs to 5mSec in 10uSec steps. This provides ultimate load simulation and control capability. Standard waveforms include sine, triangle, saw tooth, square and pulse.
M97xx SERIES - BENCH and RACK SERIES 
The M97xx Electronic loads Series is a new line of bench and rack mount loads that combines six modes of operation with fast rise time. Special test features including programmable CC soft start, dynamic pulsing, built in battery test, and short circuit mode make the loads ideal for testing power supplies and batteries as well as other power products. Loads range from 150 watts to 6000 watts.
Key Features
- 16-Bit program and measurment resolution
- 150W to 6000W models
- 150V and 500V maximum voltage
- Maximum current to 0.5V; operates to 0.3V
- CC, CR, CV, CP, CC+CV, CR+CW modes
- Short Circuit
- Battery test mode
The ML Series is a modular configuration. A Chassis can hold up to 10 Load modules making it ideal for testing multiple-output power supplies and batteries as well as other power products.. Each module is 300Watts. Modules can be combined in the factory to provide 300Watt, 900Watt, 1200Watt or 1500Watt combinations.
Key Features
- 10 * 300 Watt loads in one mainframe
- 16-Bit program and measurment resolution
- 100V, 500V or 750V maximum voltage
- Maximum current to 0.5V; operates to 0.3V
- CC, CR, CV, CP and short circuit modes
- Capacitive (RC) and inductive (RL) simulation
- 4K sequence depth
- Graphical web interface
The HP Series provides 2.5KW or 5KW loading capability for applications that require greater capacity thanthe ML chassis.These units can also be connected in parallel to increase the power capacity up to 15KW. With a maximum current of
500A and a maximum voltage of 750V, these loads will provide the user with the capability of testing large power UUT
devices.
Key Features
- 2500 Watt in 3U or 5000 Watt in 6U
- Configurable for other power outputs
- 16-Bit program and measurment resolution
- 100V, 500V or 750V maximum voltage
- Maximum current to 0.5V; operates to 0.3V
- CC, CR, CV, CP and short circuit modes
- Capacitive (RC) and inductive (RL) simulation
- 4K sequence depth
- Graphical web interface
